CyberOptics SE500ULTRA, Руководство по оборудованию

Страница: 66 / 188

Chapter 3 : Replacing Components and Preventive Maintenance
56 SE500
ULTRA
Hardware Manual
Maintenance Schedule
Perform the maintenance procedures in this section as specified in the maintenance schedule
below. Perform maintenance more frequently as required, based on machine usage.
Table 10. Maintenance Schedule
Warning:
To prevent the risk of injury, turn the AC main circuit breaker to OFF to shut down all
electrical power to the SE500
ULTRA
before starting any replacement operations. For more
information, refer to the section “ Shutting Down the System ” on page 52.
Maintenance
Monthly Annually Page
Cleaning Rear Fans Every 3 months 67
Cleaning Inside the Enclosure Every 3 months 68
Cleaning Main Electronics Panel Every 3 months 68
Cleaning the Air Regulator Filters Every 3 months 69
Cleaning Inside the Processor Every 3 months 91
Cleaning the Panel Sensors Every 3 months 114
Cleaning the Encoder Strips Every 3 months 134
Checking the Emergency Stop Functionality Once a month 70
Lubricate the Gantry and Z-Stage Every 3 months 139
Replacing the Conveyor Edge Strip Guides Once a year 93
Replacing the Conveyor Belts Once a year 104
Replacing the Drive Belts Every 3 years 105
Verifying System Accuracy Every 3 months 50
Backing Up Data Once a month 90
Frequency