Internet
ADSL/Cable Modem
Laptop
Desktop Computer
Wi-Fi Router
Modem
Power
Cable
Power
Cable
Internet
ADSL/Cable Modem
+ Wireless Router
Laptop
Desktop Computer
Modem
Power
Cable
Getting your NetGenie Ready
Before you begin surfing the Internet using NetGenie, you need to
assemble the appliance.
1. Screw in detachable Wi-Fi antennas in their respective jacks provided
in the back panel.
2. Look out for a sticker at the bottom of the appliance containing the
default wireless network name, technically known as SSID and a
pass key specific for your appliance. These details pre-secure your
wireless network from any unauthorized access attempts. Please
note down your pass key for future reference.
3. Plug one end of the power adapter into the socket on the back of the
NetGenie Base Unit.
4. Plug the other end of the power adapter into the nearest main socket.
5. Before you access the Internet through NetGenie, make sure the
power is switched on. The Power LED on the front panel should turn
green.
3
2
Section
Phone Line → ADSL
/
Cable Modem
→ PC / Laptop
:
Refer to Scenario 1
Internet
Desktop Computer
Internet
ADSL/Cable Modem
Desktop Computer
Modem
Power
Cable
Desktop Computer
Internet
Phone Line → ADSL
/
Cable Modem
which is also your Wi-Fi access point
→ PC / Laptop
:
Refer to Scenario 4
Direct Cable → PC / Laptop:
Refer to Scenario 2
USB Modem:
Refer to Scenario 3
Phone Line → ADSL
/
Cable Modem → Wi-Fi access point
→ PC / Laptop
:
Refer to Scenario 4
Identify your Home Internet Set up
Depending on your home network set-up, you can connect NetGenie to the Internet by referring to any of the
following scenarios:
1. Wireless Network Name
2. Security/Pass Key
1
2
