Using the On-Screen Setup Menu
Adjusting Video and Audio Settings in the DVD Player Setup
Your Player features an on-screen Setup Menu that allows you to adjust settings for your
Video and Audio preferences, and enable player features like Parental Lock. When you
change settings in the Setup Menu, they are stored even when power is turned off. If you
wish to return to the factory defaults, they can be easily reset in the OTHERS menu.
2
SETUP
Press the SETUP Button
Press SETUP to enter the on-screen Setup Menu. The initial
screen contains the following categories:
1
STOP
Stop Disc Play
Press the STOP button to stop play of the disc. With Audio
CDs and DVDs, after the STOP button is pressed once, the
CyberHome root frame will be displayed on the built-in
Screen. After exiting the Setup Menu, you can resume
playback where you left off.
3
4
Move Around the Menu with the ARROW Keys
Use the ARROW buttons to move around the menu. In this example, we’ll hit the DOWN key
twice to go to AUDIO SETUP, then hit ENTER or Right Arrow Key to enter that Menu. Then
we’ll hit the DOWN key again to select DIGITAL. Pressing the ENTER key and then press
the UP/DOWN ARROWs. Now we can use the UP/DOWN ARROW keys to make a
selection. In this example, we will choose LPCM. Finally, pressing the ENTER button
confirms the setting.
5
SETUP
Press SETUP to Exit the On-Screen Setup Menu
You can exit the Setup menu at any time by simply pressing the SETUP key.
LANG.
VIDEO
AUDIO
CHILD
OTHERS
EXIT
ENTER RETURN SETUP
LANG.
VIDEO
AUDIO
CHILD
OTHERS
EXIT
DIGITAL
D.R.C
ENTER RETURN SETUP
DOLBY/DTS
TV MODE
LANG.
VIDEO
AUDIO
CHILD
OTHERS
EXIT
DIGITAL
D.R.C
ENTER RETURN SETUP
LPCM
TV MODE
38
ENTER
3
4
2
5
1
