© 2014, CyberData Corporation, ALL RIGHTS RESERVED
930945A
Quick Reference Quick
Reference
930945A
© 2014, CyberData Corporation, ALL RIGHTS RESERVED
RTFM Button
Dimensions
Maximum Recommended Wall Cutout Dimensions
RTFM
When the device is operational and linked to a network, you can
use the Reset Test Function Management (RTFM) button (SW1
[see picture]) to announce the device’s IP address or restore the
device to the factory
default settings.
To announce the device’s current IP address:
•
Press and release the RTFM button within a five second
window.
Note
The device will use DHCP to obtain the new IP
address (DHCP-assigned address or default to
10.10.10.10 if a DHCP server is not present).
To restore the device to factory default settings:
•
Press and hold the RTFM button for longer than five
seconds until you hear the device announce that it is
restoring the factory default settings.
4
.5
3
[115.
0
]
4
.5
3
[115.
0
]
2
.
22
[56.
3
]
DIMENSIONS
ARE
IN
INCHES
[
MI
LL
IME
T
ER
]
DIMENSIONS ARE IN INCHES
[
MI
LL
IMETER
]
3
.
40
[
8
6.
4
]
ø0
.
19
[
ø4
.
8
]
2
.
39
[6
0
.
8
]
3
.
40
[
8
6.
4
]
2
.65
[6
7
.
3
]
0
.5
0
[
12
.
8
]
0
.
38
[
9
.5]
(4 Places)
Cable Connections
Terminal Block Connections
Mounting
PCB Assembly
Microphone to J6
Backplate
J2
J6
J7
Button to J2
Screw (3x)
Speaker to J7
PCBA Mounting
Screw (4x)
Network Cable
(Not Provided)
to
Rotate Backplate 90° (One Open Slot)
for Network Cable Coming from Top
Rotate Backplate 180° (Two Open Slot)
J1
J1
= Cable Slot Open
= Cable Slot Close
J3 Terminal Block
Wire (IN)
can accept 16 AWG wire
*Contacts 1 and 2 on the J3 terminal block are only for
powering the Intercom from a non-PoE 12VDC power
source as an alternative to Network PoE power. Use of
these contacts for any other purpose will damage the
Intercom and void the product warranty.
Relay Contact:
(1 A at 30 VDC for continuous loads)
3 = Relay Common
4 = Relay Normally Open Contact
5 = Sense Input
6 = Sense Ground
2 = Power Ground*
1 = 8 to 12 VDC at 1000 mA*
3
4
Alternate Power Input:
7 = Reserved for Future Use
8 = Reserved for Future Use
1
8
Use a 3.17 mm (1/8-inch) flat blade
screwdriver for the terminal block screws
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
