background image

© 2016, CyberData Corporation, ALL RIGHTS RESERVED

930351C

Quick Reference 

Quick  Reference 

930351C

© 2016, CyberData Corporation, ALL RIGHTS RESERVED

Features 

DIP Switch Settings 

DIP Switches

Speaker Volume

Network Link LED (

GREEN

/

YELLOW

)

Status LED (

GREEN

)

A steady LED confirms that the V2 Loudspeaker Amplifier is oper-
ational. The LED will blink during a page when it is online.

Network Activity LED (

GREEN

Power LED (

GREEN

/

BLUE

)

The power LED is a steady 

green

 in low power mode and a steady 

blue

 during high power 

mode. The power LED will only blink either during a boot up or a phone call.

RTFM Switch

To broadcast a V2 Loudspeaker Amplifier’s current IP address, press the RTFM switch on 
the V2 Loudspeaker Amplifier for one second, and then release the switch to hear the IP 
address announcement.

To restore the factory defaults, complete the following steps:

1. Press and hold the 

RTFM

 switch for eight seconds. The V2 Loudspeaker Amplifier will 

announce the words, “restoring defaults”, and then announce the words, “rebooting”. 

2. Release the 

RTFM 

switch. The V2 Loudspeaker Amplifier settings 

will be restored to the factory default settings.

DIP Switch Settings—Low Power—802.3af Compliant

DIP Switch

Default Setting Description

1

OFF

Sets PoE for 802.3af class.

2

N/A

Not applicable for power setting.

3

ON

Switch mode current set to 

LOW

.

4

OFF

Low gain amplifier setting.

DIP Switch Settings—High Power—802.3at Compliant

a

a. If set to high power, the unit will not power ON with 802.3af compliant switch. You must use a 

power injector in this mode (CyberData Part Number 011124). 

High power PoE mode

conforms to IEEE 802.3at draft 3.0.

DIP Switch

Setting

Description

1

ON

Sets PoE for 802.3at class.

2

N/A

Not applicable for power setting.

3

OFF

Switch mode current set to 

HIGH

.

4

ON

Force high gain amplifier.

DIP Switch 2 Settings

DIP Switch

Setting

Description

2

OFF

Manual Vol

. The speaker volume is set manually by the analog 

volume trimmer.

2

ON

Bypass

. Bypasses the manual volume control of the analog volume 

trimmer and uses the web page volume settings.

7.938

 [201.63]

6.281 [159.54]

Dimensions are in Inches [Millimeters]

Dimensions and Mounting Template

14.500

[368.30]

10.875 [276.23]

4.375

 [111.13]

Cable Grommets (3 PLCS)

Dimensions are in Inches [Millimeters]

Отзывы: