Installing the Singlewire-enabled Speaker
Configure the Speaker Parameters
Operations Guide
930320A
CyberData Corporation
20
6. Click the
Update Firmware
button to open the
Upgrade
Firmware
page. See
Figure 2-14
.
Figure 2-14. Firmware Upgrade Page
Note
Figure 2-14
shows the factory default settings.
7. Enter the IP address of your TFTP server into the
TFTP Server IP
parameter field.
8. Enter the firmware filename of the file to be uploaded into the
New Filename
parameter field.
For example, kernel filename
201-image-spk-sip.bin
.
9. Click
Upload File
.
Note
This starts the upload process. Once the Singlewire-enabled Speaker has uploaded the file,
the
Uploading Firmware
countdown page appears, indicating that the firmware is being
written to flash. The Singlewire-enabled Speaker will automatically reboot when the upload
is complete. When the countdown finishes, the
Upgrade Firmware
page will refresh. The
uploaded firmware filename should be displayed in the system configuration (indicating
successful upload and reboot).