CyberData 10776, Руководство по эксплуатации

Страница: 13 / 28

Installing and Using the Hub
Operations Guide 930102D CyberData Corporation
9
2.4.2 Host Connector
The connection to the host computer is achieved via a standard USB 2.0 certified Hi-Speed “A” to
“B” cable that is included in the Accessory Kit, or with any equivalent USB 2.0 certified Hi-Speed
cable. Refer to the
Section 2.1, "Product Components List" for information about the Accessory Kit.
See ”Figure 2-7” and ”Figure 2-10” for views of the Hub cable routing to the Dell Retail Integrator.
Figure 2-7. Dell Retail Integrator—Hub Cable Routing
2.4.3 PoweredUSB Connections
The PoweredUSB connections are standard USB “A” connectors with four extra pins to supply
higher voltages. See
”Figure 2-7”on page 9 . The lower portion of the “A” connector on this product
can be used alone, without the locking PoweredUSB connector.
4-Port Hub Dell PC
4-Port Hub +24Volt
DC Plug-in cable
Dell Retail Integrator
Power Supply Brick* 4-Port PoweredUSB
Hub Power Supply
Brick (feet out) AC in for 4-Port Hub
Power Supply Brick
Host USB Port
* Do not use the Dell Power supply Twist Locks to secure the Dell power supply
4-Port Hub USB 2.0
Host Connector
cable plug-in