© 2016, CyberData Corporation, ALL RIGHTS RESERVED
931190A
Quick Reference
Quick Reference
931190A
© 2016, CyberData Corporation, ALL RIGHTS RESERVED
Mounting
Contacting CyberData
*Ceiling Tile or Dr
y
Wall
VoIP V3 Speaker
Asse
m
bl
y
#8 Fender Washer (3x)
#8 N
y
lon Thu
m
b Nut (3x)
#6 Screw (3x)
Dr
y
Wall Mounting Kit
Te
m
plate
Plastic Ribberd Anchor (3x)
Dr
y
Wall Mounting Kit
#8-32x1 1/4" (3X)
Ceiling Mounting Screw
*Optional Reinforce
m
ent Mount
P/N: 010991A (Sold Seperatel
y
)
Tools Required for Installation:
•
(1) Sheetrock saw or
(1) Drywall cutter
•
(1) #2 Phillips Screwdriver or
(1) #2 Phillips Screwdriver Hex Bit
To mount a speaker:
1. Use the TEMPLATE on the back of this
document to cut a hole in the wall or ceiling,
and prepare holes for the screws.
2. Plug the Ethernet cable into the speaker
assembly. The yellow light verifies the
network connection.
3. For drop ceiling mounting, position the
SPEAKER ASSEMBLY in the ceiling so
that its screw holes align with those you
prepared.
4. For drywall mounting, place the three
PLASTIC RIBBED ANCHORS in the holes
you prepared, and position the SPEAKER
ASSEMBLY over them, aligning the screw
holes in the assembly with the anchors.
5. For drop ceiling mounting*, use the three
8-32 x 1 1/4" MOUNTING SCREWS, #8
NYLON THUMB NUTS, and #8 FENDER
WASHERS to secure the speaker.
For drywall mounting, use the three #8
SHEET METAL SCREWS to secure the
speaker.
* For weak ceiling tile, CyberData offers a
reinforcing mount (CyberData part number
010991A).
Speaker
Assembly
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Support Website:
RMA Department: (831) 373-2601 ext. 136
RMA Email: [email protected]
RMA Status:
Warranty Information:
http://support.cyberdata.net/
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
Dimensions and Connections
Connecting Power
Features
AUX SPEAKER (-)
AUX SPEAKER (+)
GND
LINE OUT (-)
LINE OUT (+)
BUTTON LED (-)
BTN SENSE
BUTTON LED (+)
RELAY NO
RELAY COM
AUX POWER (-)
AUX POWER (+)
(+12VDC @ 1A)
J10
J9
CLASS II WIRING
9.000 [228.60]
3.140 [79.75]
DIMENSIONS ARE IN INCHES [MILLIMETER]
9.000 [228.60]
3.140 [79.75]
DIMENSIONS ARE IN INCHES [MILLIMETER]
802.3af Compliant PoE Switch
PoE Injector (part #010867)
Non PoE Switch
RTFM Switch
To broadcast a device’s current IP address, press and
release the RTFM switch within a five second window.
To restore a device’s factory default settings, press and hold
the RTFM switch for more than five seconds.
Speaker Volume
Network Link/Activity LED (yellow)
Speaker Status LED (green)
A solid light confirms that the speaker is operational.
Microphone
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
