Quick Reference
931190A
© 2016, CyberData Corporation, ALL RIGHTS RESERVED
© 2016, CyberData Corporation, ALL RIGHTS RESERVED
931190A
Quick Reference
4.00 [101.6]
120°
VoIP Speaker
Mounting Template
Speaker Hole Diameter:
7.50 [190.5]
Screw Hole Diameter:
0.1875 [4.75]
Dimensions are in inches [millimeter]
Typical System Installation
Getting Started
•
Download the Operations Guide PDF file, from the Downloads tab at the following webpage:
http://www.cyberdata.net/voip/011397/
•
Create a plan for the locations of your SIP Talk-Back Speakers.
•
WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes.
•
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
•
WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant.
•
WARNING: This enclosure is not rated for any AC voltages!
Parts
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
802.3af/at Compliant Ethernet Switch
IP Phone
SIP Talk-Back Speaker
IP PBX Server
SIP Speaker
Optional Remote Call Button
(not included and sold separately)
(3) #8 Nylon Thumb Nuts
(3) #8 Fender Washers
(3) 8-32 x 1 1/4” Mounting
Screws
(1) Speaker Assembly
(1) Drop Ceiling Mounting Kit
(1) Drywall Mounting Kit
(3) Plastic Ribbed Anchors
(3) #8 Sheet Metal Screws
* See the last page
of this document
(1) Template
The IP Endpoint Company
Installation Quick Reference
SIP Talk-Back Speaker
SIP Compliant
011397*
, RAL 9002, Gray White, Standard
011398*
, RAL 9003, Signal White, Optional
*Replaces the 011180 and 011181 numbers.
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
