POE Clock Messages
Definitions
Operations Guide
931080C
CyberData Corporation
31
2.3.24 <NTPUpdate>
Configurable value “True” or “False” specifying whether POE Clock will perform automatic update of
date and time from a NTP server.
2.3.25 <NTPURL>
Configurable URL of an NTP server from which automatic NTP update will be taken. Be aware that if
a URL is specified, POE Clock uses DNS Server IPs from the network configuration dialog to locate
the NTP server by URL. Also, if NTPIP parameter contains a valid IPv4 address, it will override
NTPURL parameter.
2.3.26 <PacketType>
The first tag in all packets identifies a packet and its function.
2.3.27 <ProductName>
Identifies a CyberData CDNetDevice, assigned at manufacture.
2.3.28 <ProductType>
Identifies the CyberData product type, assigned at manufacture.
2.3.29 <Request>
UDP broadcast commands return a Confirmation or Rejection packet. This data element identifies
the Packet Type of the command.
2.3.30 <S2_SR>
POE Clock Ethernet controller TCP command port status indicates the state of the TCP command
port, LISTEN or CONNECTED.
2.3.31 <Sequence>
Dump Configuration and Load Configuration commands and their responses have a sequence
number to provide for multiple commands and responses when configuration data becomes too
large to fit one packet. Currently configuration data fits a single command and response.