Installing the VoIP Indoor Office Ringer
Parts List
Operations Guide
930386E
CyberData Corporation
30
2. On the
Officeringer Configuration
page, enter values for the parameters indicated
in
3. After changing the parameters, click on the
Save
button.
Table 2-10. Officeringer Configuration Parameters
Web Page Item
Description
Enable Officeringer
When the officeringer is enabled, the unit will attempt to
register a second extension with the SIP server. Any calls
made to this extension will play a ringtone.
Officeringer Settings
SIP Server
Type the SIP server represented as either a numeric IP
address in dotted decimal notation.
Remote SIP Port
Type the Remote SIP Port number (default 5060)
(8 character limit).
Local SIP Port
Type the Local SIP Port number (default 5060)
(8 character limit).
Note
: This value cannot be the same as the
found on the
.
User ID
Type the
User ID
(up to 64 alphanumeric characters).
Authenticate ID
Type the
Authenticate ID
(up to 64 alphanumeric
characters).
Authenticate Password
Type the
Authenticate Password
(up to 64
alphanumeric characters).
Re-registration Interval (in seconds)*
Type the SIP Registration lease time in minutes (default is
60 minutes) (8 character limit). Re-registration Interval (in
seconds)*
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.