Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
Operations Guide
930363H
CyberData Corporation
20
3. On the
Home Page
, review the setup details and navigation buttons described in
Web Page Item
Description
Device Settings
Device Name
Shows the device name (25 character limit).
Change Username
Type in this field to change the username (25 character limit).
Change Password
Type in this field to change the password (19 character limit).
Re-enter Password
Type the password again in this field to confirm the new password
(19 character limit).
Current Settings
Serial Number
Shows the device serial number.
Mac Address
Shows the device Mac address.
Firmware Version
Shows the current firmware version.
IP Addressing
Shows the current IP addressing setting (
DHCP
or
Static
).
IP Address
Shows the current IP address.
Subnet Mask
Shows the current subnet mask address.
DNS Server 1
Shows the current DNS Server 1 address.
DNS Server 2
Shows the current DNS Server 2 address.
Boot Time
Shows the boot time.
Current Time
Shows the current time.
I C Servers
Shows the InformaCast Server IP addresses.
Configuration File
Shows the configuration file.
B’casts Accepted
Shows the number of B’casts accepted.
B’casts Rejected
Shows the number of B’casts rejected.
B’casts Rejected
Shows the number of active B’casts.
RTP Packets Rx’d
Shows the number of RTP packets Rx’d.
Miscellaneous Settings
Beep on Initialization
Select either
Yes
or
No
to indicate if you want to hear a beep when
the unit is powered up.
Two Speakers Connected
Select either
Yes
or
No
to indicate whether you have two speakers
connected.
Disable Volume Control Dial
When selected, the volume control dial will be disabled.
Relay Settings
Activate Relay While Page Active
When selected, the relay will be activated for as long as the page is
active.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.
Table 2-10. Home Page Overview
