Implementing the VoIP Zone Controller
Configuring the VoIP Zone Controller
VoIP Zone Controller 4-Port Audio Out Operations Guide 930109C
CyberData Corporation
9
Note
To work with the VoIP Zone Controller configuration
after
the initial configuration, log in
using the IP address you assign to the device.
Section 2.4.3, "Configure the Network
provides instructions for entering the IP address.
2. When prompted, use the following default
Username
and
Password
to open the configuration
Home page:
Username:
admin
Password:
admin
Figure 2-6. Home Page
3. On the
Home Page
, review the setup details and navigation buttons described in
.
Table 2-1. Home Page Overview
Web Page Item
Description
Device Name
Shows the device name.
Serial #
Device serial number.
Ethernet Address
Device ethernet address.
IP Addressing
Shows the current IP addressing setting (
DHCP
or
static
).
IP Address
Shows the current IP address.
Subnet Mask
Shows the current subnet mask address.
Default Gateway
Shows the current default gateway address.
DNS Server 1
Shows the DNS Server 1 address.
Содержание 010881
