Copyright © 2020 Cyber Power Systems, Inc.
HARDWARE INSTALLATION
2
HARDWARE INSTALLATION
These versatile EBM can be mounted in a rackmount or vertical tower
orientation. This is especially important to growing organizations with
changing needs that value having the option to position an EBM on the
floor or in a rackmount system. Please follow the instructions below for
the respective mounting methods.
SAFETY PRECAUTIONS
CAUTION!
To prevent the risk of fire or electric shock, only use the
supplied hardware to attach the mounting brackets.
RACKMOUNT INSTALLATION FOR 4-POST RACK
Step 1: Remove the dust covers
Remove the dust covers *5 pcs from the screw holes.
Step 2: Rackmount ears & hanging brackets installation
Attach two rackmount ears to the EBM using the provided M5X7L*8pcs
screws and tighten two hanging brackets with the M5X6L*6pcs screws.
Step 3: Rackmount rail Installation
The rails adjust to mount in 48-cm (19-inch) wide racks from 52 to
91.5cm (20.5 to 36 inches) deep. Select the proper holes in the rack for
positioning the EBM in the rack. The EBM takes up 2 rack units.
Position the guide screws on the rails into the rear rack square holes to
temporarily support the rails in place. Tighten the front rail screws on the
rack.
