v2.4c
03.04.12
CybTouch6_Shear_Usermanual_v2.4c_TK
page 14 of 18
Here the default characteristics for each material can be changed, or a new material
and its corresponding characteristics can be configured in the CybTouch:
Material
: Selected material name (here
Steel
).
Default thickness
: Default thickness for the material (here
1.0
mm)
when you call the material.
Displayed
: determines whether the material shall be available to be
selected or not for use (here
yes
).
Thickness/Blade gap/Cutting angle/min – max:
Determines
the default blade gap and cutting angle used according to the thickness of
the material.
Three predefined default materials are available (steel, stainless steel, aluminum).
Other materials can be added. To add a material, simply touch
until an empty page
is displayed (
called Material_X
), and then enter the values for the material to be
created, as mentioned above.
If an operator wishes to be able to modify the blade gap in order to improve the quality
of the cut, a range of tolerated values must be entered (using the
min/max
column.
After the
Blade gap
column, there is a
min/max
header. Touching this header
displays two columns (min and max). For each blade gap defined by the
manufacturer, a range of tolerated values can be defined for the operator.
The values entered here must prevent any programming errors and be in accordance
with the machine. By activating this feature, the blade gap is automatically displayed in
the working pages.
S
ERVICE
Touching
Service
in the
Other
menu displays the
Service
menu below. A key
code will be requested. Enter the service code and press
Enter
.
A
XIS SETTING
--X--
Allows the position of the back gauge to be set. This operation is not necessary if the
back gauge is configured to search for the index at machine start up.
