CYBELEC CybTouch 12PS, Руководство пользователя

Страница: 17 / 64

User Manual – CybTouch series
CybTouch series – User Manual
J
AN
.
2020
V5.0
16/98
Touching Materials opens the Materials page, where the default characteristics for each
material can be changed, or a new material can be configured.
This page may not be available, depending on the machine parameters’
configuration. To be allowed to access the Materials page, a level 2 password is
required
The Materials page displays:
•
Material : Selected material (here Steel ).
•
Default thickness for the material.
•
Default sigma : Default sigma for the material (here 45 ).
•
Displayed : If the material will be available to be selected for use (here yes ).
•
K DIN 6935 : Allows to correct the blank length accordingly to DIN 6935.
•
Predefined thickn. : Allows defining up to 7 different predefined thicknesses for
the selected material.
•
Thickness min/max : Determines the maximum and minimum accepted thickness
for the selected material.
Three predefined default materials are available (steel, stainless steel, aluminium), but
others can be added.
To add a material:
1. Touch Material and select a non-configured material (Mater X) from the list.
2. Enter the new material’s characteristics.
Materials