CVS SKL 1200 C, Руководство по сборке

Страница: 8 / 32

Assembly instructions Screw compressor SKL 1200 C
Safety
8
2
Safety
2.1 Intended use
The screw compressor SKL 1200 C is intended for the
installation in a superordinate system. The manufacturer of the
overall system must assess the new risks resulting from the
installation. These risks must be included in the operating
instructions of the system.
The compressor is intended exclusively for the compression of
filtered air.
Use the compressor only as intended.
All information in the installation and operating instructions must be
strictly observed (technical data, operating data, permissible
working range, see page 11).
All types of claims due to damage arising from improper use are
excluded. The operator alone shall be responsible for any damage
arising from improper use.
2.2 Acceptance and monitoring
The compressor itself is not subject to any acceptance and
monitoring obligation.
2.3 Operator's responsibility
See operating instructions "SKL 1200 C" for information about the
responsibility of the operating company.
2.4 Requirements placed upon the specialised staff
The mounting instructions specify the following qualification
requirements for the different fields of activity:

Specialists
are due to their technical training, knowledge and experience
and their knowledge of the pertinent regulations able to carry
out the work assigned to them and to independently recognize
potential hazards.

Electrical specialists
are, due to their technical training, knowledge and experiences
and their knowledge of the relevant standards and regulations,
able to work on electrical systems and to independently
recognize possible hazards.