CVC SWEEP AWAY Скачать руководство пользователя страница 2

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE 

USING THIS VACUUM SYSTEM

   

•  Unplug and disconnect power before servicing.

•  Electric shock could occur if used on wet surfaces.

•  Do not allow to be used as a toy. Close attention is necessary when used by  or near children.

•  Use only as described in this manual. Use only manufacturers recommend attachments. 

•  Do not use damaged cord or plug. If appliance is not working as it should, has been dropped, damaged,

   left outdoors, or dropped into water, return it to a service center.

•  Do not pull or carry by the cord, use cord as a handle, close door on cord, or pull around sharp edges or

   corners.  Do not run appliance over cord. Keep cord away from heated surfaces.

•  Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•  Do not handle system or appliance with wet hands. 

•  Do not put any object into openings.

•  Do not use with any opening blocked; keep free of dust, lint, hair, and 

  anything that may reduce air flow.

•  Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts

•  Do not use without dustbag and/ or filters in place.

•  Do not pick up anything that is burning  or smoking, such as cigarettes,matches, or hot ashes.

•  Connect to a properly grounded outlet. See grounding instructions.

•  Turn off all controls before unplugging.

•  Use extra care when cleaning on stairs.

•  Do not use to pick up flammable or combustible liquids such as gasoline or  use in areas where they 

  may be present.

•  To reduce the risk of electric shock do not use on wet surfaces.

•  To reduce the risk of injury from moving parts unplug before servicing.

To reduce the risk of fire, electric shock or injury:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of 

least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a 

cord having an equipment grounding conductor and grounding plug. The plug must be plugged into an 

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check 

with a qualified electrician or service person if you are in doubt as to whether the outlet is properly 

grounded. Do not modify the plug provided with the appliance- if it will not fit the outlet, have a proper 

outlet installed by a qualified electrician.

The Sweep Away Cabinet Vac appliance is for use on 

a nominal 120 volt circuit and has a grounding plug 

that looks like the plug illustrated in Fig. A.

Make sure that the appliance is connected to an outlet

 having the same configuration as the plug. No adapter 

should be used with this appliance.

Connect to a properly 

grounded outlet only.

GROUNDING INSTRUCTIONS

When using an electrical appliance, basic precautions 

should always be followed, including the following:

2

Содержание SWEEP AWAY









Отзывы: