3) CARACHTERISTICS OF
THE JOINT CUTTER
MODEL
ENGINE
STARTER
MC301RB
Robin
6 HP Petrol
Manual
MC301HD
Honda
5.5 HP Petrol
Manual
high temperatures
belt drive
excessive noise
amputation
flammable materials
2.2) SAFETY SIGNS
2.3) CORRECT POSITION OF THE OPERATOR
3.1) JOINT CUTTER MODELS
• 15 l. water tank
• hand-wheel mounted
on reinforced support
• blade cooling system
• roll bar
• lifting hook
• guide rod
• handles for lifting the machine manually
• blade guard
• belt protection flange
• blade fitting spanners
• It is prohibited to install the machine in environments
subjected to fire hazard or explosion
• It is prohibited to use the machine for purposes other
than the ones indicated in this manual
• It is prohibited to remove or deactivate safety devices
while the machine is operating
The following symbols represent the risks that can occur even after all the required
precautions have been adopted:
The machine can be easily used by one operator.
Stand behind the machine and use the handles to move it.
2.4) AIRBORNE NOISE AND VIBRATIONS
As to the machine emissions, the intensity of sound has been measured in accordance
with current regulation EEC 256. According to these measurements, the sound level
is lower than 101dB.
Sound pressure was measured at a distance of 1 metre from the machine and a
height of 1.6 metres from the ground, in normal conditions.
Vibrations were not measured as they are below the risk level.
• It is prohibited to
remove the safety
guards
• It is prohibited to work
on moving parts
• Danger and safety signs must be kept in perfect condition.
In case of deterioration they must be replaced promptly
3.2) DESCRIPTION OF THE JOINT CUTTER
Main characteristics:
• blade diameter 300mm
• cutting depth 100mm
• steel chassis
• epoxy paint coating
• blade shaft supports and wheels reinforced with self-aligning tight bearings
• belt tension adjustment device