Cutera Excel V, Руководство оператора

Страница: 60 / 102

54
EXCEL V OPERATOR MANUAL
D1025, REV H, 10/17
Inspecting and Cleaning the Handpiece Lens(es)
The recessed handpiece lens(es) is (are) located at the distal end of the handpiece. Prior to treatment,
as well as periodically during treatment, inspect the lens(es) for cracks and debris. If the handpiece
lens(es) is (are) cracked or otherwise damaged, do not use the handpiece. If the handpiece lens(es) is
(are) dirty, clean as directed below.
Clean the handpiece lens(es) using a clean wood stick cotton swab and lens cleaning grade acetone, as
described below.
WARNING
The system must be turned OFF or in STANDBY mode prior to
inspecting the lens(es). Do not inspect the lens(es) while the system
is in READY mode. Always wear proper eyewear while the system
is ON. Severe eye damage can occur in the event of unintended
laser emission.
CAUTION
Inspecting and cleaning the handpiece lens(es) is the responsibility
of the practitioner. If the lens(es) is (are) not properly maintained,
debris can build up on the surface of the lens(es), leading to
permanent damage to the lens(es) and, ultimately, permanent
damage to the handpiece optical system. If debris cannot be
removed from the lens(es), the handpiece must be replaced.
CAUTION
Do not use germicidal disposable wipes to clean the recessed
lens(es). Doing so may damage the lens(es) and require handpiece
replacement.
NOTE
Debris from patients can accumulate on the lens(es). It may be
necessary to clean the lens(es) periodically during treatment.
NOTE
For optimal results, use acetone with 0.5% or lower water content,
which is available at most camera shops. If unable to obtain acetone
with 0.5% or lower water content, contact Cutera Service (
refer to
Appendix D ).
NOTE
Use only wood stick cotton swabs. Do not use products such as Q-
Tips as they contain an adhesive that dissolves when it comes in
contact with acetone.