Cutech 60100-CT, Руководство пользователя

Страница: 9 / 23

9
Itasca, IL 60143-3201 U.S. Department of Labor Relations
www.osha.gov
PRODUCT SAFETY
1.
Serious personal injury may occur if normal safety precautions are overlooked or ignored. Accidents
are frequently caused by lack of familiarity or failure to pay attention. Obtain advice from supervisor,
instructor, or another qualified individual who is familiar with this machine and its operations.
2.
Every work area is different. Always consider safety first, as it applies to your work area. Use this
machine with respect and caution. Failure to do so could result in serious personal injury and
damage.
3.
Prevent electrical shock. Follow all electrical and safety codes, including the National Electrical Code
(NEC) and the Occupational Safety and Health Regulations (OSHA). All electrical connections and
wiring should be made by qualified personnel only
4.
WARNING! TO REDUCE the risk of electrical shock. DO NOT use this machine outdoors. DO
NOT expose to rain. Store indoors in a dry area.
5.
STOP using this machine, if at any time you experience difficulties in performing any operation.
Contact your supervisor, instructor or machine service center immediately.
6.
Safety decals are on this machine to warn and direct you to how to protector yourself or visitors from
personal injury. These decals MUST be maintained so that they are legible. REPLACE decals that
are not legible.
7.
DO NOT leave the unit plugged into the electrical outlet. Unplug the unit from the outlet when not in
use and before servicing, performing maintenance tasks, or cleaning.
8.
WARNING! DO NOT handle the plug or sander with wet hands
9.
USE only accessories as described in this manual and recommended by CUTECH.
10.
DO NOT pull the sander by the power cord. NEVER allow the power cord to come in contact with
sharp edges, hot surfaces, oil or grease.
11.
ALWAYS turn the power switch “OFF” before unplugging the sander. DO NOT unplug the sander by
pulling on the power cord. ALWAYS grasp the plug, not the cord.
12.
REPLACE a damaged cord immediately. DO NOT use a damaged cord or plug.
13.
DO NOT use the sander as a toy. DO NOT use near or around children.
14.
ENSURE that the machine sits firmly before using. If the machine wobbles or is unstable, correct the
problem by using shims or blocks prior to operation.
15.
This machine is designed to process wood ONLY.
16.
Long pieces of stock should ALWAYS be supported with some type of fixture.
17.
MAKE CERTAIN that the sander is properly adjusted prior to use.
18.
INSPECT all stock before sanding, ensuring that there are no foreign objects embedded in the wood,
loose knots, or knots that may become loose during operation.
19.
WARNING! DO NOT attempt to remove jams until power is disconnected and all moving parts
have come to a complete stop.
20.
MAKE SURE that there is adequate operating space on all sides of the sander before operating.