Cutech 60100-CT, Руководство пользователя

Страница: 15 / 23

15
ASSEMBLY (cont.)
WARNING: TURN THE POWER OFF AND REMOVE THE PLUG FROM THE
OUTLET BEFORE CHANGING THE ACCESSORIES.
CAUTION: ‘HOOK & LOOP’ SANDING DISCS CANNOT BE USED WITH THIS
SANDER!
CHANGING SANDING DISCS
1.
Remove miter gauge and work table assembly.
2.
Remove the disc guard screws and disc guard.
3.
Remove sanding disc from disc plate. Sanding discs
are attached to the plate using a pressure-sensitive
adhesive
4.
Ensure the disc plate is clean.
5.
Peel backing away from the new sanding disc.
6.
Align perimeter of disc with plate and press disc firmly
into position on plate, leaving no loose edges.
7.
Replace the disc guard, disc guard screws and work
table.
CHANGING SANDING BELTS
CAUTION: CHECK THE INSIDE OF THE BELT FOR A "DIRECTION ARROW".
IF PRESENT, INSTALL THE BELT WITH THE ARROW POINTING IN THE
SAME DIRECTION AS THE DIRECTION INDICATOR ON THE HOUSING.
1.
Loosen the socket head screw using the 6 mm hex
wrench provided.