12
In the event the adjustable bed fails to operate, investigate the symptoms and possible solutions below.
SYMPTOM
SOLUTIONS
Troubleshooting
•
Your adjustable bed may be obstructed preventing
smooth operation. Remove obstructions from around
and under the bed.
•
Check that the head section is not too close to the
wall.
•
If a headboard is installed, check that it is not too
close to the edge of the mattress. Make sure there is
enough distance between the headboard bracket and
the mattress.
Head or foot section elevates adjustable
bed but does not return to flat position.
•
Check the batteries in the remote control. Replace
with new batteries, if necessary.
•
Make sure that you are following the duty cycle of the
motors. Do not operate for more than two minutes
over a 20-minute period or approximately 10% duty
cycle.
•
Press the lift buttons firmly and accurately.
•
Wireless remote control may be experiencing
common radio frequency interference from other
radio transmitting devices. Wait several seconds and
then try pressing the lift buttons again.
Head or foot lift function has minor
interference during operation.
1. Clear any clutter or obstructions under and around
the adjustable bed. Radio frequency interference
from other remotes or electronic devices may affect
normal operation.
2. Check the batteries in the remote.
3. Press the lift buttons on the remote control firmly and
accurately.
The adjustable bed stutters when in
motion.
