STEP 10.
Assemble the Headboard Bracket
i.
Use the hand control to elevate the head of the bed so
the bed base frame is reachable.
iv.
When headboard brackets are assembled, make sure there is a space of 1.5 (38.1 mm) to 2 inches (50.8 mm)
between the edge of the bed base and the headboard brackets.
v.
Securely fasten the headboard bolts (not included with your adjustable bed) to the end of the headboard bracket assembly.
vi.
Measure the distance from the center of one mounting hole in the headboard to the center of the other.
vii.
Measure the distance from the center of one mounting hole in the headboard bracket assembly to the center of the other.
viii.
If you need to adjust the headboard brackets, unscrew the bolts holding the outer headboard brackets and move them
the necessary distance. Reinstall the bolts and securely tighten.
STEP 11.
Place your mattress on the adjustable bed frame surface. Your adjustable bed and headboard installation is now complete.
If the bed comes with a programming option, turn to the Wireless Hand Control Operation Guide (located on page 8) to proceed.
ii.
Slide the inner headboard bracket (
D
) horizontally with the
“
C
” opening facing down under the Crossbar. Position the
Bracket (
D
) in the guide peg on the bottom of the Crossbar.
Insert a headboard bolt (
G
) fitted with a 5/16 inch washer (
I
)
thru the pre-drilled hole in the Crossbar & into the pre-drilled
slotted hole in the “
C
” channel Inner Headboard Bracket.
Tighten in place with a 5/16 inch washer (
I
) and 5/16 inch nut
(
J
). Repeat on the other side.
iii.
Place the open side of the outer headboard bracket (
E
) onto
the exposed square tube of the inner headboard bracket (
D
) to
create a tight fit between (
D
) and (
E
). Insert a retainer bolt (
G
)
fitted with a 5/16 inch washer (
I
) into the outer headboard
bracket (
E
) and through the inner headboard bracket (
D
). Hand
tighten using a 5/16 inch washer (
I
) and a 5/16 inch nut (
J
).
(Leave loose enough for adjusting.) Repeat on
the other side.
Velcro Leg Straps
(Optional: To avoid Base Separation)
5
To help prevent separation when using King Size (2 TXL)
California King Size (2 SCK) or split Queen Size (2 SQ).
Please use the enclosed Velcro Straps.
1. Simply wrap the legs together (Front & Back) tightly
using the velcro straps.
2. Fastening the straps will help prevent movement &
maintain stability.
IMPORTANT NOTES:
Failure to follow the installation steps as they appear in this guide could result in damage to your adjustable bed frame.
Make sure to position the bottom of the headboard cross member no more than
3 inches (76.2 mm) between the headboard and the top of the mattress.
The
DreamStar
World Class Adjustable Bed Base!
ALL IN ONE FILE- DREAMSTAR-NEW LAYOUT_Layout 4 8/27/15 5:59 PM Page 7
