Custom Equipment HB-P830, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 3 / 16

Original instructions are written in English
Foreword
The purpose of this Maintenance Manual is to provide qualified service personnel with information for servicing
and maintaining Hy Ͳ Brid Lifts. All information in this manual must be read and understood before any attempt is
made to service this machine.
The operation and safety manual is considered a part of the work platform and contains instructions and
operating procedures essential to properly and safely operate the Custom Equipment Hy Ͳ Brid Lift. Users must
read and understand all information in the Safety and Operations Manual before operation.
DANGER
THE OPERATION AND SAFETY MANUAL MUST BE READ AND
UNDERSTOOD PRIOR TO OPERATING THE MACHINE.
THE USER/OPERATOR SHOULD NOT ACCEPT OPERATING RESPONSIBILITY UNTIL THE MANUAL HAS BEEN READ
AND UNDERSTOOD AS WELL AS HAVING OPERATED THE LIFT UNDER SUPERVISION OF AN EXPERIENCED AND
QUALIFIED OPERATOR.
BECAUSE THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLICATION AND OPERATION,
PROPER SAFETY PRACTICES ARE THE RESPONSIBILITY OF THE USER AND ALL OPERATING PERSONNEL.
WARNING
ANY MODIFICATION ON THIS MACHINE WITHOUT THE EXPRESS
WRITTEN CONSENT OF THE MANUFACTURER IS PROHIBITED.
If there is a question on application and/or operation, contact:
Custom Equipment, Inc.
2647 Hwy 175
Richfield, WI 53076
USA
Phone: 262 Ͳ 644 Ͳ 1300
Fax: 262 Ͳ 644 Ͳ 1320
www.hybridlifts.com
Part #SUPO-615
REV H Page 4 of 30
Safety
Safety Symbols
DANGER
FAILURE TO FOLLOW THIS WARNING
WILL CAUSE DEATH OR PERSONAL INJURY.
"DANGER" indicates an imminently hazardous
situation, which, if not avoided, will result in death
or serious injury.
WARNING
FAILURE TO FOLLOW THIS WARNING MAY CAUSE
DEATH OR PERSONAL INJURY
.
"
WARNING" indicates a potentially hazardous
situation, which, if not avoided, could result in
death or serious injury
CAUTION
FAILURE TO FOLLOW THIS WARNING
MAY CAUSE INJURY OR DAMAGE EQUIPMENT
"CAUTION" indicates a potentially hazardous
situation which, if not avoided, could result in
minor or moderate injury or damage to equipment
General Rules and Precautions
Custom Equipment, Inc. designed the Hy Ͳ Brid Lift push Ͳ around scissor lift to be safe and reliable. It is intended
for elevating personnel, along with their necessary tools and materials to overhead work locations.
An operator of any type of work platform is subject to certain hazards that cannot be protected by mechanical
means. It is therefore essential that operators be competent, careful, physically and mentally fit and
thoroughly trained in safe operation of this machine.
Although Custom Equipment, Inc. conforms to specified American National Standards Institute ANSI/SIA
A92.3 Standard, it is the responsibility of the owner to instruct operators with the safety requirements made
not only by Custom Equipment, Inc., but by the various safety boards in your area, as well as additional
requirements set forth by ANSI A92.3. If you come across a situation that you think might be unsafe, stop the
platform and request further information from qualified sources before proceeding.
WARNING
MAINTENANCE INFORMATION IS FOR USE BY TRAINED PERSONNEL ONLY
WARNING
NEVER REACH BETWEEN SCISSORS LINKS OR PROP UP PLATFORM UNLESS
MAINTENANCE PINS ARE IN PLACE.
Part #SUPO-615
REV H Page 5 of 30