Custom Engineering PLUS II, Руководство пользователя

Страница: 12 / 64

• FEED key When the LINE FEED key is pressed (see fi g.4), the printer advances the paper. During
power-up, if the FEED key is held down, the printer enters the SETUP routine and print the
SETUP report. The printer will remain in standby in Hexadecimal dump mode until another
key is pressed or characters are received through the printer communication port; for every
10 characters received it prints hexadecimal values and ASCII codes (if the characters appear
underlined, it means the receive buffer is full); See Hexadecimal Dump.
• OPEN key Press the OPEN key to open the paper roll compartment.
< 500 msec
FAST PUSH
> 500 msec
PUSH
FEED
The FEED key functions are valid for all the PLUS II models.
ENTER SETUP
PRINT SETUP REPORT
Next parameter
SKIP SETUP
ON
Modify parameter
(Fig.4)
INTRODUCTION
4 PLUS II
User Manual