PORTABLE MASSAGE TABLE USER’S GUIDE AND WARRANTY
4
Portable Massage Table
PORTABLE TABLE SET UP
To set-up your table:
1. Set folded table on its rubber bumpers and loosen closure strap.
2. Remove face rest base and face pillow. (If included with your table)
3. Open the table up until the legs are fully extended. Grasp the handles and pull the sides apart The legs and braces should snap into place. (Pictures 3 and 4)
4. With the table opened, tilt the table upright until all four feet are on the floor. Then lift one end of the table while pushing down on the middle.
Check to ensure that cables aren’t twisted and that the table is level. (Picture 5)
PICTURE 1
PICTURE 5
PICTURE 6
PICTURE 2
PICTURE 3
PICTURE 4
To adjust the table height:
Choose the hole that represents the desired height and after removing the knob,
put the bolt through that hole. Replace and tighten the knobs by hand until snug.
Repeat on all other leg extensions, setting all extensions at the same height.
