Custom Audio Electronics TG558 Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 60

background image

INTRODUCTION

TG558

1

MANUAL ORGANIZATION

In addition to the Introduction which contains information regarding the symbols used in the manual, general
safety information, instructions for unpacking the printer and a brief description and main characteristics of the
machine, this manual is divided into the following chapters:
Chapter 1:

Contains the information required for correct printer installation and use

Chapter 2:

Contains interface data

Chapter 3:

Contains a description of printer controls

Chapter 4:

Contains printer technical data

Chapter 5:

Contains the character sets (fonts) used by the printer

Appendix :

Contains a description of printer accessories and spare parts.

SYMBOLS USED IN THE MANUAL

NOTE

Gives important information or suggestions for printer use.

WARNING

Information indicated by this symbol must be followed carefully to avoid damaging the printer.

DANGER

Information indicated by this symbol must be followed carefully to avoid damage or operator injury.

GENERAL SAFETY INFORMATION

•

Read and retain the instructions which follow.

•

Before cleaning the printer, be sure to pull out the electrical cable.

•

Use a damp cloth to clean the printer. Do not use liquid or spray products.

•

Do not operate the printer near water.

•

When positioning the printer, make sure its cables will not be damaged.

•

Use the type of electrical power supply indicated on the printer label. If uncertain, contact your dealer.

•

Do not block the ventilation openings.

•

Do not insert objects inside the printer as this could cause short-circuiting or damage components that
could jeopardize printer functioning.

•

Do not spill liquids onto the machine.

•

Do not carry out repairs on the machine yourself, except for the normal maintenance operations given in
the user manual.

•

Unplug the printer from the electrical mains and call a specialized repairman if any of the following
conditions should arise:

A. the power supply connector is damaged
B. liquid has spilled into the printer
C. the printer has been exposed to rain or water
D. the printer is not functioning normally despite the fact that all instructions given in the user

manual have been followed

E. the printer has been dropped and the cover is damaged
F. printer performance is noticeably reduced
G. the printer is not working

UNPACKING THE PRINTER

Remove the printer from the carton, taking care not to damage the packing materials which should be retained
for future shipping/moving.
Make sure all components listed below are present and not damaged. If any part is missing and/or damaged,
contact customer service.

«
...
6
7
8
9
10
...
»

Содержание TG558 Series





























































Отзывы:

Нет отзывов

Похожие инструкции для TG558 Series

PIXMA MX882 Series

Бренд: Canon Страницы: 34

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 913

Laser Class 700 Series

Бренд: Canon Страницы: 30

Laser Class 700 Series

Бренд: Canon Страницы: 6

Laser Class 700 Series

Бренд: Canon Страницы: 6

Laser Class 700 Series

Бренд: Canon Страницы: 108

PIXMA MX860 series

Бренд: Canon Страницы: 9

imagePROGRAF iPF9400

Бренд: Canon Страницы: 8

PIXMA MX860 series

Бренд: Canon Страницы: 93

Бренд: Canon Страницы: 20

Бренд: Canon Страницы: 30

Бренд: Canon Страницы: 2

Бренд: WANHAO Страницы: 29

Бренд: OKIDATA Страницы: 182

BOOKLET MAKER BK5010

Бренд: Ricoh Страницы: 74

Бренд: Olivetti Страницы: 139

Бренд: Muratec Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды