APPENDIX A - ACCESSORIES AND SPARE PARTS
TG558
4
A-
ATTENTION
:
Verify that the paper
roll pivot is positioned as indicated
in this enlargement with beveled
part (k) facing low; othervwise
unloosing the fixing screw of paper
roll pivot and so positioning itself in
this mode.
(K) : Beveled part
ATTENTION
:
Verify that the paper
roll pivot is positioned as indicated
in this enlargement with beveled
part (k) facing low; othervwise
unloosing the fixing screw of paper
roll pivot and so positioning itself in
this mode.
(K) : Beveled part
35mm Version
1- Attach the support to the printer body using the two M3x6 fixing screws (3) supplied with the kit, as shown in
fig. A.6.
2 - Insert the near paper end sensor connector (1) of the roll holder support into the printer connector as shown
in fig. A.6.
(Fig.A.5)
(Fig.A.6)