Custom Audio Electronics TG2480HIII, Руководство пользователя

Страница: 43 / 80

SPEED / QUALITY Setting of printing speed and printing quality:
Normal D
High Speed
PRINT WIDTH Width of printing area:
76 mm D
80 mm
PAPER THRESHOLD Threshold value (in percent) for the recognition of the presence of paper by the paper
presence sensor:
30% 60% 90%
40%
D
70%
50% 80%
PAPEREND BUFFER CLEAR Cleaning mode of the data in receive buffer, if the printing is stopped due to lack of paper:
Disabled
D
= the data remain in the receive buffer. When the paper runs out, the device
keeps the remaining data in the receive buffer and prints the remaining
portion of the ticket after that the new paper is loaded.
Enabled = when the paper runs out, all data in the receive buffer are deleted.
LOW ENERGY MODE Setting the inactivity period in seconds after which the device enters in sleep mode:
Disabled
D
15 s
30 s
60 s
LED bar FGND (RRGGBB) Set the foreground color for the status LED on the bezel. This parameter consists in three
value for red, green and blue color to be expressed in hexadecimal:
RR = from 00
D
to FF
GG = from 00 to FF
D
BB = from 00
D
to FF
LED bar BGND (RRGGBB) Set the background color for the status LED on the bezel. This parameter consists in three
value for red, green and blue color to be expressed in hexadecimal:
RR = from 00 to FF (8F
D
)
GG = from 00
D
to F
BB = from 00 to FF
D
PRINT DENSITY Adjusting the printing density:
-25% 0
D
+25%
-12% +12%
NOTE:
The print quality is strongly inluenced by the type of chemical treatment and the type
of storage to which the thermal paper has been subjected, as well as by the weight of
the same. It may therefore necessary to act on this parameter to obtain the desired
print quality.
43