Custom Audio Electronics tg2480h, Руководство пользователя

Страница: 64 / 108

B. MARK ALIGNMENT
Management of the paper alignment:
Disabled D = the notch alignment is not performed
Enabled Internal (1) = the notch alignment is performed
Enabled External (1) = the notch alignment is performed
NOTE:
(1) : The difference between the “Enabled Internal” and “Enabled External” values is reserved for future use:
both the values enable the notch alignment.
B. MARK THRESHOLD
Threshold value for the recognition of the presence of notch by the notch sensor:
0.75V 1.50V 2.25V
1.00V 1.75V 2.75V
1.25V
D
2.00V 2.50V
NOTE: If the “B. Mark alignment” parameter is disabled, the “B. Mark threshold” parameter is not printed.
B. MARK DISTANCE
“B. Mark distance” is the minimum distance (in mm) between the upper edge of ticket
and the notch.
The numeric value of the distance is made up with the following three parameters for the
setting of three digits (two for the integer part of the number and one for the decimal part):
B. MARK DISTANCE [mm x 10]
Setting the digit for tens:
0 D 1
B. MARK DISTANCE [mm x 1]
(1)
Setting the digit for units:
0 D 2 4 6 8
1 3 5 7 9
B. MARK DISTANCE [mm x .1]
Setting the digit for decimals:
0 D 2 4 6 8
1 3 5 7 9
NOTES:
For example, to set the notch distance to 10 mm, modify the parameters as follows:
B. Mark Distance [mm x 10] = 1
B. Mark Distance [mm x 1] = 0
B. Mark Distance [mm x .1] = 0
If the “B. Mark alignment” parameter is disabled, the “B. Mark alignment” parameter is not printed
(1) : The values of “B. Mark distance [mm x 1]” > 2 can be set only if “B. Mark distance [mm x 10]” = 0.
PRINT DENSITY
Adjusting the printing density:
-50% -12% +25%
-37% 0
D +37%
-25% +12% +50%
64