Custom Audio Electronics KPM862, Руководство пользователя

Страница: 93 / 152

6.8 Alignment parameters
The device allows the coniguration of the parameters listed in the following table.
The parameters marked with the symbol D are the default values.
Settings remain active even after the device has been turned off and they are stored in non-volatile memory.
BLACKMARK POS. F1
Position of the black mark alignment and choice of appropriate black mark sensor:
Disabled = the black mark alignment is not performed
Bottom D
= the black mark position is detected by the lower sensor (relection)
Transparent = the black mark position is detected by both the sensors (transparence)
BLACKMARK POS. F2
Position of the black mark alignment and choice of appropriate black mark sensor:
Disabled = the black mark alignment is not performed
Bottom D
= the black mark position is detected by the lower sensor (relection)
Transparent = the black mark position is detected by both the sensors (transparence)
This parameter is valid only for KPM862 DF, KPM862 DF-EJC, KPM862 DF-vSEL,
KPM862 DF-hSEL, KPM863 DF, KPM863 DF-EJC, KPM863 DF-vSEL, KPM863 DF-hSEL,
TK862 DF, TK862 DF-EJC, TK862 VR DF.
BARCODE STOCK CONTROL Barcode search function:
Disabled D = the search is not performed
Enabled = the search is performed
BLACKMARK
“Blackmark” deines the values necessary to customize the positioning of the sensor
for detecting the black mark, the positioning of the cutting line with respect to the align-
ment black mark and the correct management of the parameters for the “Stock Control”
barcode search.
For more information on alignment see
chapter 7 .
This parameter is not printed on setup report and it is modiiable only during setup pro
-
cedure by software.
BLACK PERCENT (%) Percentage of black points within the alignment black
mark area necessary for it to be retained:
from 0 to 100
RIGHT MARGIN (1/10 mm) Distance between the right edge of the ticket and the
right edge of the alignment black mark:
from 0 to 853
HEIGHT (1/10 mm) Alignment black mark height:
from 0 to 200
WIDTH (1/10 mm) Alignment black mark width:
from 0 to 853
93