Custom Audio Electronics KPM862, Руководство пользователя

Страница: 92 / 152

PAPER END MANAGEMENT Management of the paper end sensors of dual feeder:
Print All D = when the paper end sensor of a feed line of the dual feeder detects the
paper end, it is not possible to change the feed line until all tickets remain-
ing in that feed line are printed (so that the paper sensors of the printer will
have detected the end of paper)
Eject = when the paper end sensor of a feed line of the dual feeder detects the
paper end, the device automatically ejects the paper remaining on that feed
line and prints diagonal voiding lines on the remaining tickets
Retract = when the paper end sensor of a feed line of the dual feeder detects the
paper end, the device performs a paper retracting up to the parking position
This parameter is valid only for KPM862 DF, KPM862 DF-EJC, KPM862 DF-vSEL,
KPM862 DF-hSEL, KPM863 DF, KPM863 DF-EJC, KPM863 DF-vSEL, KPM863 DF-hSEL,
TK862 DF, TK862 DF-EJC, TK862 VR DF.
PAPEREND BUFFER
CLEAR Cleaning mode of data in receive buffer, if the printing is stopped due to lack of paper:
Disabled D = Data remain in the receive buffer. When the paper runs out, the device
keeps the remaining data in receive buffer and prints the remaining portion
of ticket after that the new paper is loaded.
Enabled = When the paper runs out, all data in the receive buffer are deleted.
PRINTHEAD TEST
POWERON Setting of the performing of the print head test:
Disabled
D
= the test is performed only during the printing of the setup report
Enabled = the test is performed at each power on
EJECTOR SPEED Adjusting the ejector speed:
100% 75%
D
50% +25%
PRINT DENSITY Adjusting the printing density:
-25% 0
D
+25%
-12% +12%
The print quality is strongly inluenced by the type of chemical treatment and the type of
storage to which the thermal paper has been subjected, as well as by the weight of the
same. It may therefore necessary to act on this parameter to obtain the desired print quality.
SELECTOR OPTION Selector management:
Not Present
D
= Selector not present
Present = Selector present
92