Cushman Titan 36V, Руководство пользователя и руководство по обслуживанию

Страница: 26 / 72

OPERATION AND SERVICE INFORMATION
Page 8
Owner’s Manual and Service Guide
Read all of Manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
CAB AND WINDSHIELD
The optional cab does not provide protection
from roll over or falling objects.
The windshield does not provide protection
from tree limbs or flying objects.
The cab and windshield provide protection from the ele-
ments This vehicle is not equipped with seat belts and
the cab has not been designed to provide roll over pro-
tection. In addition, the cab does not protect against fall-
ing objects nor does the windshield protect against flying
objects and tree limbs. Keep arms and legs inside of
vehicle while it is moving.
VEHICLE CLEANING AND CARE
Vehicle Cleaning
To reduce the possibility of severe injury or
vehicle damage, read and understand all
instructions supplied by manufacturer of pres-
sure washer.
When pressure washing exterior of vehicle, do not use
pressure in excess of 700 psi (4800kPa). To reduce the
possibility of cosmetic damage, do not use any abrasive
or reactive solvents to clean plastic parts.
It is important that proper techniques and cleaning mate-
rials be used. Using excessive water pressure may
cause severe injury to operator or bystander, damage to
seals, plastics, seat material, body finish or electrical sys-
tem. Do not use pressure in excess of 700 psi (4800 kPa)
to wash exterior of vehicle.
Normal cleaning of vinyl seats and plastic or rubber trim
requires the use of a mild soap solution applied with a
sponge or soft brush and wipe with a damp cloth.
Removal of oil, tar, asphalt, shoe polish, etc. will require
the use of a commercially available vinyl/rubber cleaner.
The painted surfaces of the vehicle provide attractive
appearance and durable protection. Frequent washing
with lukewarm or cold water and mild detergent is
required to preserve the painted surfaces.
Occasional cleaning and waxing with non-abrasive prod-
ucts designed for ‘clear coat’ automotive finishes will
enhance the appearance and durability of the painted
surfaces.
Corrosive materials used as fertilizers or for dust control
can collect on the underbody of the vehicle. These mate-
rials will cause corrosion of underbody parts unless
flushed occasionally with plain water. Thoroughly clean
any areas where mud or other debris can collect. Sedi-
ment packed in closed areas should be loosened to ease
it’s removal, taking care not to chip or otherwise damage
paint.
REPAIR
Lifting the Vehicle
Tool List Qty. Required
Floor jack .....................................................................1
Jack stands..................................................................4
Chocks.........................................................................4
Some servicing operations may require the front wheels,
the rear wheels, or the entire vehicle be raised.
To reduce the possibility of severe injury or
death from a vehicle falling from a jack:
Be sure the vehicle is on a firm and level
surface.
Never get under a vehicle while it is sup-
ported by a jack.
Use jack stands and test the stability of the
vehicle on the stands.
Always place chocks in front and behind the
wheels not being raised.
Use extreme care since the vehicle is
extremely unstable during the lifting process