Cushman 626823, Руководство пользователя

Страница: 53 / 64

5 - 17
MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5
REAR AXLE
The rear axle is provided with a lubricant level check plug located on the driver side at the rear of the housing.
Unless leakage of rear axle lubricant is evident, an annual lubricant check is sufficient.
Checking The Lubricant Level
Tool List Qty. Tool List Qty.
Socket, 13 mm ............................................................ 1 Drain Pan ................................................................ 1
Ratchet........................................................................ 1 Funnel ..................................................................... 1
Clean the area around the check and fill plugs. Remove
the check plug. The correct lubricant level is
just below the
bottom of the threaded hole. If lubricant is to be added,
remove the fill plug and add lubricant using a funnel. Add
lubricant slowly until lubricant starts to seep from the check
plug hole. Install the check plug and the fill plug. In the
event that the lubricant is to be replaced, a drain plug is
provided at the bottom of the differential housing.
LUBRICATION
Do not use more than three (3) pumps of grease in any
grease fitting at any one time. Excess grease may cause
grease seals to fail or grease migration into areas that
could damage components.
Putting more than three pumps of grease in a grease fitting
could damage grease seals and cause premature bearing
failure.
SPARK PLUGS
Tool List Qty. Tool List Qty.
Spark Plug Socket, 13/16” .......................................... 1 Ratchet.................................................................... 1
Plug Gauge, Wire Type ............................................... 1 Anti-seize Compound........................................... AR
Torque Wrench, ft. lbs. ................................................ 1
Use care not to over-tighten the plug. Over-tightening can cause damage to the aluminum cylinder head threads.
Drain Plug
Fill / Check Plug
Lubrication Points
View from Underside of Vehicle
Rack
Ball
Joint