Cushman 626823, Руководство пользователя

Страница: 52 / 64

MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5 - 16
5
It is important to periodically check and maintain proper brake fluid levels in the brake master cylinder. The fill cap for
the master cylinder is located under the seat bottom of the first forward facing seat. When checking the fluid, wipe off
any dirt from the fill cap before removing it to reduce the possibility of contamination. Fluid level should be main-
tained between the MAX and MIN fill lines. If fluid must be added, inspect the system for fluid leaks.
AIR INTAKE AND COOLING FINS
To prevent possible burns, engine parts should be
kept clean to reduce risk of overheating and ignition
of accumulated debris. After every off road use,
allow to cool and then check for a build up of dirt
and debris in the air intake and cooling fins. Dirt
and debris may clog the engine’s air cooling sys-
tem. Clean areas shown to prevent engine dam-
age. Keep linkages, springs and controls clean.
Keep area around muffler free of any combustible
material.
At least once a year, (or more often under adverse conditions)
the cooling system should be cleaned. Cleaning will assure an
adequate supply of air to the cooling fins. Compressed air
may be used for routine cooling system maintenance.