Page 22
Owner’s Manual and Service Guide
GENERAL SPECIFICATIONS
ELECTRIC POWERED THREE WHEEL SERVICE VEHICLE
BATTERIES....................................................................... Four 6 volt deep cycle (105 minute minimum, 220 amp-hour @ 20 hour discharge
rate)
SPEED CONTROLLER..................................................... Solid state, 275 amp capacity with potentiometer throttle sensor
MOTOR ............................................................................. 24 VDC, series wound 1.5 hp (1.1 kW) @ 2800 rpm & 4.3 hp (3.2 kW) @ 1200
rpm, brazed armature and solid copper windings
TRANSAXLE ..................................................................... 14.78:1 helical geared with input pinion shaft directly connected to motor shaft
BRAKES............................................................................ Dual rear wheel, mechanical drum brakes
PARKING BRAKE ............................................................. Automatic
FRONT SUSPENSION ..................................................... One piece front axle
REAR SUSPENSION........................................................ Coil springs over hydraulic shock absorbers
STEERING ........................................................................ Chain & linkage
STEERING WHEEL .......................................................... Dual handgrips
SEATING ........................................................................... None
CAPACITY......................................................................... Operator
TOTAL LOAD CAPACITY.................................................. 1000 lbs. (454 kg) including operator, accessories & cargo
SPEED .............................................................................. 9 mph (15 kph)
CHASSIS........................................................................... Welded tubular steel; powder coated (Durashield™)
VEHICLE PROTECTION .................................................. None
BODY ................................................................................ Bolt-on diamond pattern body panels with Durashield™ Industrial Yellow powder
coat paint
STANDARD COLOR(S) .................................................... Industrial Yellow
LOAD BED ........................................................................ 29" (74 cm) W x 48" (122 cm) L
LOAD BED FEATURES .................................................... Removable for powertrain access
LIGHTING/HORN (Standard) ............................................ Rear brake light, horn
TIRES (Standard) .............................................................. 4.80 x 8 Industrial Load Range B
TIRE PRESSURE ............................................................. 60 psi (415 kPa)
WEIGHT (without batteries) .............................................. 490 lbs. (225 kg)
OPERATING CONTROLS & INSTRUMENTATION .......... Removable key, ‘deadman’ accelerator control, direction selector, audible reverse
warning
BATTERY CHARGER ....................................................... Total Charge
®
III on-board 24 V, 120 VAC, fully automatic, line compensating, 21
amp DC output at 24 volts, 6.5 amps input, 60 Hz, UL recognized, CSA certified
OPTIONS/ACCESSORIES ............................................... Audible forward motion indicator
Batteries 145 minute 250 amp-hour @ 20 hour discharge rate
Beacon light
Bolt-on 4 step ladder
Bolt-on 6 step ladder (includes counterweight)
Differential scuff guard
‘E’ hitch
Front counterweight
Galvanized steel cargo deck
Headlights and taillight
Hour meter
Lift out battery tray with batteries
Lift out battery tray with batteries, 145 minute 250 amp-hour @ 20 hour discharge
rate
Lift out battery tray without batteries
Paint color (custom)
Pintle hitch
Stainless steel cargo deck
State of Charge meter (LED)
Tires 4.80 x 8 (6 ply rated) Industrial Load Range B (Foam Filled)
Total Charge
®
III portable 24 V, 120 VAC, fully automatic, line compensating, 21
amp DC output at 24 volts, 6.5 amps input, 60 Hz
UL listed, CSA certified
Tubular steel side rails
UL approved ‘EE’ classification
Specifications subject to change without notice
