Cushion Pack CP 320 S2i, Руководство по эксплуатации

Страница: 8 / 10

cushion pack cushion pack
cushion pack cushion pack
cushion pack
cushion pack cushion pack
cushion pack cushion pack
cushion pack
CP 320 S2i
Operating Instructions – Start-up
Important Maintenance and Cleaning Instructions
Before opening the housing, for example, for cleaning
and maintenance work, the machine is always first to be
disconnected form the mains.
Pull the mains plug !
Maintenance and Cleaning of the Cutting Mechanism
The gears and the drive chain must be cleaned and
greased monthly.
Proceed as follows:
1. Open the hood. Remove two screws.
2. Remove the left side cover on the housing
3. With a vacuum cleaner, vacuum the cutting duct
and dirt. Clean the chain and gears (with
compressed air, if necessary).
4. After the cleaning is completed, apply grease
with a brush or grease gun to the gears and the
drive chain.
5. The left and right of the cutting mechanism -
where the cutter shaft is held by the bearing -
are to be sprayed with oil on the bearing plates
and the cutting blades.
6. Close and firmly screw on the hood and the side
cover.
Repairs may be performed only by a speci!
!
!
!