CUSHCRAFT R7000, Инструкция по сборке и установке, Страница: 5 / 8

32 902832 SS RADIAL 49" 7
(124.5 cm)
87 014387 SS/NYLON 8-32 4
LOCK NUT
88 014388 SS/NYLON 10-24 1
LOCK NUT
120 010120 SS MACHINE 8-32 x 2" 1
SCREW (5.1 cm)
160 190160 MN7000 1
BRACKET
326 290326 WARNING 7
LABEL
MN7000 MATCHING 1
NETWORK
4
#2 - ATTACH MATCHING
NETWORK AND RADIALS
KEY P/N DISPLAY DESC SIZE QTY
One at a time, place the stainless steel radial rods into the
slots of the radials rings. Tighten the corresponding ring
screws as you work your way around the rings. The radial
rings do not have to touch each other to secure the radial
rods properly so do not overtighten the screws. When all 7
radial rods are secure, tighten the two screws holding the
radial ring brackets to the base. Attach warning labels (326)
as shown in Figure E.
Attach matching network upper bracket (160) to base assembly
(BA) using screws (120) and nuts (87). Attach MN7000 to
base assembly by inserting the two 8-32 mounting screws
into the upper bracket (160) and securing screws with two
nuts (87). Place bottom of MN7000 over the 10-24 captive
screw and secure with nut (88). Connect braid from radial
ring to MN7000 screw as shown using nuts (87).
FIGURE
E
R7000
120
87
87
MN7000
87
28
88
32
32
32
32
326
87
32
326
326
326
326
160