CUSHCRAFT A449-6S, Сборка и инструкция по установке

Страница: 5 / 8

A449-6S
4
32 190032 U-BOLT 3-5/8" x 2-1/2" 1
BRACKET (9.2 x 6.4 cm)
33 190033 BACKING 3-1/2" 1
PLATE (8.9 cm)
118 010118 SS HEX 5/16" 2
NUT (.8 cm)
119 010119 SS LOCK 5/16" 2
WASHER (.8 cm)
326 290326 DANGER 1
LABEL
405 010405 SS 4-1/2" x 2-7/16" 1
U-BOLT (11.4 x 6.2 cm)
402 013402 SS FLAT 5/16" 2
WASHER (.8 cm)
KEY P/N DISPLAY DESC SIZE QTY
FIGURE D
Mount the antenna to your mast using the U-bolt bracket (32) and the
hardware provided per figure D. There are two pair of U-bolt mounting
holes, one for vertical polarizaztion and one for horizontal. Tighten the
U-bolt taking care not to crush the boom. Affix warning label to the boom
as shown.
#3 - MAST MOUNT
115 050115 CONNECTOR 1
BOOT
116 240116 SILICONE 1
PACKAGE
#4 - CONNECTOR ASSEMBLY
This antenna is designed for use with 50 Ohm coaxial cable terminated with a PL-259 connector. Any length of feedline can be used with
your A449-6S. The shortest length of cable will have the least loss. A connector boot is included for use with your new antenna. Slide
the boot over the cable before attaching your PL-259 (figure E). Spread silicone on the outer threads of the Reddi-Match connector and
PL-259 connector. DO NOT COAT THE CENTER PIN OF THE PL-259. Attach the connector to the Reddi-Match. Apply the remaining
silicone to the outside of the connector. Slip the vinyl boot over the connector and against the connector bracket for a weather tight
connection.
KEY P/N DISPLAY DESC SIZE QTY
SILICONE GREASE
cushcraft
cushcraft
COAT WITH SILICONE GREASE
(DO NOT coat the center pin or socket!)
cushcraft
FIGURE E
1
2 3 4 5 6
EF EE ED EC EB EA
FIGURE F
119
32
405
118
326
402
33