more than 5 seconds and then loosen(CSW02 please long press CALL Button,
or insert a needle into Reset Hole to press down for more than 5 seconds and
then loosen), a few seconds later, the indicator light will turn to red. About 1
minute later, when the indicator light flashes red and the doorbell makes a
sound of “Wait to be configured”, open App to set up the doorbell to connect to
Wi-Fi.
---------------------------------------------------------------------
If the device has already done with Wi-Fi setup, other family members also
want to add device in App, it’s highly recommended to use the same account
to log in. If using different user accounts, please add device by the following
functions:
1) Add device in the same WLAN:
Make sure that the device and your
cellphone connect the same Wi-Fi, then click this function to add device.
2) Add Shared Device:
Add a device by inputting serial number or scanning the
QR Code shared by other user account
PS:
If the device has not been connected to Wi-Fi yet, please don’t use “Add
device in the same WLAN” and “Add Shared Device” to add device
4. Indoor Chim/Bell(Each doorbell can connect up to 4pcs at the same time
)
If you bought the indoor chime/bell as well, you can match it to the doorbell.
When somebody press CALL button, the indoor chime plays music. The steps
are as following:
1) Plug the indoor chime into AC Socket, long-press the volume key, don’t