When your system is armed, all detectors are active.
By app
Connect to your alarm and click on “Arm”.
By remote control
Press on the “Arm” button of the remote control .
On the control panel
Click Arm button.
By SMS
Send 1 to the phone number of the SIM card in the control panel.
(Only saved SMS numbers can disarm the system by SMS.)
9 Connect wireless accessories
10 Daily use
Arm the system
When your system is armed in Home mode, all detectors are active
except those assigned to the Home zone.
By app
Connect to your alarm and click on “Home mode”.
Arm in Home mode
9.1 By the keypad:
--Enter the settings menu, type Admin cod Enter button;
--Choose “Accessories”
→
”RFID Tag”/”Remote control”/”Wireless
sensor”
→
”Add a new”;
9.2 By the APP: Connect to the alarm, choose the wireless accessory
→
click “+” ADD.
9.3 Trigger the accessory which will be connected, you will hear one
beep: the accessory is registered. If the control panel beeps twice, the
detector was already connected.
9.4 Repeat step1 or 2, then step3 for next accessory.
Содержание Smart Alarm System
Страница 1: ...Curv Smart Alarm System Instructions ...
Страница 2: ......