12 Reset Wi-Fi
If you want to connect the alarm to your APP or change the network
of the alarm, you need reset the Wi-Fi to factory settings to enable
the function.
13 Restore Admin Code
Turn the control panel on. Press the tamper switch at the back of
the control panel 5 times within 5 seconds after having turned it on.
The Admin code will be restored to the factory settings:123456.
This operation is only for user forgot his admin code, The stored
phone numbers, system settings and connected accessories will
not be changed.
At home
-
The built-in siren starts ringing out.
-
If you have connected additional sirens, they start ringing out too.
On your smartphone(if your alarm is connected to your Wi-Fi
network)
-
You receive a push notification in the
Curv Smart
app (you must
have an Internet access on your smartphone).
On your smartphone (with a SIM card in the control panel)
-
The control panel sends an SMS notification to every SMS number saved.
-
The control panel calls every Phone number saved. If you take that call,
you can decide to stop the siren, disarm the system or other functions
as listed below, by dialing the corresponding code in Table1.
Operation : Type Admin Code:Enter button to the settings
menu
→
choose “WIFI Config”
→
choose “Connecting”, then press
“Enter” button to start the network setting.
Содержание Smart Alarm System
Страница 1: ...Curv Smart Alarm System Instructions ...
Страница 2: ......