manualshive.com logo in svg

Curtiss-Wright PMC-605, Руководство пользователя, Страница: 18 / 86

Поделиться
Скачать
Curtiss-Wright PMC-605 Скачать руководство пользователя страница 18

C

URTISS

-W

RIGHT

 C

ONTROLS

 E

MBEDDED

 C

OMPUTING

PMC-605 PCI-P0 B

RIDGE

 M

ODULE

809524 R

EVISION

  D F

EBRUARY

 2009

1-3

S

UMMARY

 

OF

 F

EATURES

The PMC-605 has the following major features:

Clock Speed

The Intel 21554 PCI-to-PCI Bridge device supports a clock speed of 33 MHz on the Secondary 
PCI Bus and 33 MHz on the Primary PCI bus. The Primary PCI bus connects to the PCI-P0 
bus and the Secondary PCI bus interface connects to the Host PCI bus.

Bus Arbitration

The PMC-605 is dynamically configured during power-up or reboot to act as the bus arbiter 
when placed in the PCI-P0 backplane’s System Slot. The PMC-605 uses a parallel arbitration 
scheme.

PCI Bus Clock

The PMC-605 can generate a PCI bus clock for the PCI-P0 bus or receive it from an external 
source. The PCI bus clock is dynamically enabled when placed in the PCI-P0 backplane’s 
System Slot and is disabled when placed in a Peripheral Slot.

Synchronous and 
Asynchronous 
Operation

The PCI-P0 bus can be synchronous to the Primary PCI bus or operate completely 
asynchronously according to the configuration of its PCI bus clock source.

System Slot 
Termination

The PMC-605 is dynamically configured during power-up or reboot to terminate signals as 
necessary for the PCI bus when placed in the PCI-P0 backplane’s System Slot.

Power 
Requirements

The PCI-P0 bus is 3.3 V signalling, 5 V tolerant. The PMC-605 is powered via the basecard’s 
+5 V rail; an on-board regulator pr3.3 V.

Configuration 
EEPROM

A serial EEPROM stores basic configuration information for the 21554 
PCI-to-PCI Bridge device.

JTAG Support

The CPLD supports

 

the IEEE Std 1149.1 boundary scan (JTAG) and is In-System 

Programmable (if so configured by the fitting of optional zero ohm resistors) through the 
host SBC JTAG interface. If the optional zero ohm resistors are not fitted, the CPLD must be 
programmed through an on-board header. Note that the Intel 21554 is not included as part 
of the JTAG loop.

Ruggedization 
Levels

The PMC-605 is available in air-cooled and conduction-cooled versions.

LED

The PMC-605 has a green software-controllable power-on LED. 

Note

More information on the PMC-605 features listed above is provided in the following sections.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Содержание PMC-605























































































Отзывы:

Нет отзывов