Curtiss-Wright GT200 Скачать руководство пользователя

Страница: 20 / 62

PRODUCT OVERVIEW

•

Cross-point configuration controlled across VME Bus or RS-232 port

•

Front panel “Signal Detect” status indicators for each port provided

•

Front panel “Power On” status indicator

•

Front panel “Transmitter On” status indicator for each port

•

Front panel “Heartbeat” status indicator

•

Provides unique VME card base addressing

•

Card Reset switch

•

Password Reset switch

•

Watchdog timer

•

32 KB Non-volatile SRAM (NVSRAM)

For more detailed information regarding VLX2500 features and operation, contact
Curtiss-Wright Controls, Inc. and request a copy of the

LinkXchange VLX2500 Physical

Layer Switch Hardware Reference Manual

or visit our web site.

2.4.7 LinkXchange GLX4000 Physical Layer Switch

The GLX4000 Physical Layer Switch has the following features:

•

Up to 144 non-blocking I/O ports.

•

Up to 4.25 Gbps/port data rate.

•

48 Small Form Factor, Pluggable (SFP) transceiver modules per SFP port card.

•

48 (SFP) transceiver modules per SFP Retimed port card

•

48 IEEE 1394b "Firewire" copper media ports per IEEE 1394b port card.

•

Port cards and pluggable transceivers may be mixed in one system.

•

Supports Loop, Point-to-Point, One-to-Many communication links.

•

Supports multiple physical media options including short wavelength (850 nm), long
wavelength (1300 nm), and HSSDC2.

•

Automatic port fault isolation.

•

Front panel indicators:

•

Signal Detect.

•

Transmitter ON.

•

Heartbeat.

•

Flash Write.

•

Fan/Temperature Alarm.

•

Watchdog.

•

Out-of-band control through an Ethernet port.

•

Can be controlled from a remote location.

•

Dual-redundant hot-swappable power supplies.

•

Hot-swappable fans.

•

Hot-pluggable Small Form-factor transceiver modules.

•

Hot-pluggable port cards.

•

Multiple temperature monitoring points within the enclosure.

•

Configuration data stored on a removable CompactFlash card.

•

Automatic fan speed control based on enclosure temperature.

•

Fan tachometer monitor.

For detailed information regarding the GLX4000 features and operation, contact
Curtiss-Wright Controls, Inc. and request a copy of the

GLX4000 Physical Layer Switch

Hardware Reference Manual

or visit our web site.

2-8

GT200

Hardware Reference

Содержание GT200





























































Результаты поиска

Содержание GT200

Отзывы:

Похожие инструкции для GT200

Бренды по названию

Популярные бренды

Curtiss-Wright GT200, Справочник по аппаратуре

Результаты поиска

Содержание GT200

Отзывы:

Похожие инструкции для GT200

Бренды по названию

Популярные бренды