Curtiss-Wright GT200 VME, Справочник по аппаратуре

Страница: 9 / 58

1. INTRODUCTION
1.1 How to Use This Manual
1.1.1 Purpose
This document is a reference manual for the GT200 VME card. It provides a physical and
functional description of the GT200 VME card. The manual describes how to unpack, set
up, install, and operate the hardware.
1.1.2 Scope
This information is intended for systems designers, engineers, and network installation
personnel. You need at least a systems level understanding of general computer
processing, computer networking, and hardware operation to effectively use this manual.
Style Conventions
•
Called functions are italicized. For example, OpenConnect() .
•
Data types are italicized. For example, int .
•
Function parameters are bolded. For example, Action .
•
Path names are italicized. For example, utility/sw/cfg .
•
File names are bolded. For example, config.c .
•
Path file names are italicized and bolded. For example, utility/sw/cfg/config.c .
•
Hexadecimal values are written with a “0x” prefix. For example, 0x7e.
•
For signals on hardware products, an ‘Active Low’ is represented by prefixing
the signal name with a slash (/). For example, /SYNC.
•
Code and monitor screen displays of input and output are boxed and indented on
a separate line. Text that represents user input is bolded. Text that the computer
displays on the screen is not bolded. For example:
C:\ls
file1
file2 file3
•
Large samples of code are Courier font, at least one size less than context, and
are usually on a separate page or in an appendix.
1.2 Related Information
•
American National Standard for VME64 (ANSI/VITA 1-1994(R2002)) ,
VITA www.vita.com .
•
American National Standard for VME64 Extensions (ANSI/VITA 1.1 –
1998(R2003))
, VITA
•
American National Standard for 2eSST (ANSI/VITA 1.5 – 2003) , VITA
P. O. Box 19658 Fountain Hills, AZ 85269 USA
•
PCI Local Bus Specification, Revision 2.2, 18 DEC 1998, PCI SIG
Copyright 2005 1-1 GT200 VME Hardware Reference