Curtiss-Wright GT200 VME Скачать руководство пользователя | Manualshive

Страница: 37 / 58

background image

OPERATION

The settings are as follows:

•

Baud Rate: 19,200

•

Data Bits: 8

•

Parity: None

•

Stop Bits: 1

•

Hardware Handshaking: None

The RS-232 port is not used during normal operation, but may be used to access utilities
to configure the card.

4.4.3 10/100 Ethernet Interface

One 10/100 Mbps Ethernet port is provided on an 8-pin RJ-45 connector. The 10/100
Ethernet port is not used during normal operation, but may be used to access utilities to
configure the card.

4.4.4 10/100/1000 Ethernet Interface

One 10/100/1000 Mbps Ethernet port is provided on an 8-pin RJ-45 connector. The
10/100/1000 Ethernet port is not used during normal operation, but may be used to access
utilities to configure the card.

4.4.5 GT200 VME Configuration

4.4.5.1 Configuring GT200 VME Via RS-232 (Serial) Console

Initial configuration of GT200 VME should be performed through the RS-232 interface.
Connect to this interface using terminal emulation software (e.g. HyperTerminal or
Minicom) configured with the settings described in section 4.4.2

RS-232 Interface. After

boot-up has completed, a “login” prompt will appear (if connecting after boot-up, press
<ENTER> a few times to reach the login prompt). Log in with username, ‘

user’,

no

password is required. A simple menu system will appear which allows numerical
selection from several options. This menu system can be used to configure and view
GT200 VME settings including:

•

VME windows and VME slot number

•

GT200 options

•

Ethernet / IP interface settings

The menu system can also be used to restore factory default configurations.

Configuration changes made using the menu system are stored in flash memory, and will
be retrieved and restored each time GT200 VME is powered up. Changes also take effect
real-time after the user gives confirmation, unless otherwise noted. For example, changes
to the IP settings will be delayed until boot-up unless forced into effect when prompted.

Copyright 2005

4-9

GT200 VME Hardware Reference

«
...
35
36
37
38
39
...
»

Содержание GT200 VME



























































Отзывы:

Нет отзывов

Похожие инструкции для GT200 VME

Бренд: B2 Страницы: 52

Бренд: National Instruments Страницы: 85

Pixie-4 Express

Бренд: XIA Страницы: 17

Бренд: Dahua Страницы: 24

Бренд: Omega Engineering Страницы: 34

Бренд: TANDBERG Страницы: 3

Duinotech Lilypad Plus XC3920

Бренд: Jaycar Electronics Страницы: 2

Fan Tray 8820-S2-900

Бренд: Paradyne Страницы: 6

Бренд: Xmart Страницы: 8

Wireless Connectivity Cape

Бренд: Element14 Страницы: 2

Бренд: Idis Страницы: 17

Бренд: Commell Страницы: 36

Бренд: Taiwan Commate Computer Inc. Страницы: 25

Бренд: Greenlee Страницы: 52

Бренд: ICP DAS USA Страницы: 62

Бренд: Adaptec Страницы: 2

55PUS8118 SCSI-2

Бренд: IBM Страницы: 42

Бренд: Addi-Data Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды