KIT/001
3
Contact extraction
When removing contacts, place the connector in the vice so
that you are pushing the contacts from the opposite side they
were inserted.
1.
Place the extraction tip (ACD/TOL/006) in the inser
-
tion/extraction handle (ACD/TOL/005).
2.
Insert the extraction tip into the socket until you feel the
contact butt up against the shoulder of the pin contact.
3.
While keeping the tool perpendicular, apply a firm steady
pressure to push the contact and remove it from the con
-
nector.
4.
Repeat these steps for other contacts to be removed.
W
ARNING
:
It is recommended that pins are only inserted once
into each pin location of the connector. A reinser
-
tion of any pin into a location where a pin has been
removed may result in a loose pin.
