PROGRAMMING GUIDE
PG4
8$130(3"..*/((6*%&ø
B
Programming Options (cont.)
continued
continued...
Master Reset
<-- Select -->
Cold Brew Lock
<-- Select -->
Access Code
<-- Select -->
Banner Name
<-- Select -->
Service Call
<-- Select -->
P-Maintenance
<-- Select -->
Cold Brew Lock -
adjusts the temperature at which the brewer will brew when a
BREW button is pressed (
Ready to brew
appears on the display). This feature also
adjusts the temperature at which the heating element turns on to reheat the water
in the tank. The available settings are 5°F/3°C, 15°F/8°C (below the water tank
temperature settings) and Off. Off is within 30°F/17°C below the tank temperature
setting. Once accessed (
~
), press
Ż
or
Ź
to select the desired setting. Press
~
to
save. Press
Ź
to display the subsequent menu features.
Master Reset -
resets the brewer universal control module (UCM) to the factory
default settings. Once accessed (
~
), “Are You Sure?” will appear on the display. Press
Ż
for Yes or
Ź
for No. If you press No, the display goes back to the programming
menu. If you press Yes, the UCM will reset and exit programming mode.
Service Call -
sets the service phone number that appears on the display when the
UCM detects a SENSOR ERROR or WATER ERROR. Once accessed (
~
), press
Ż
or
Ź
to select the number to be changed. Press
~
repeatedly
to change the number
value. Press
Ż
or
Ź
to select the next number to change. When done, press
Ź
VOUJMFYnBTIFTPOUIFEJTQMBZBOEQSFTT
~
. Press
Ź
to display the subsequent menu
features.
Access Code -
sets the access code entered to access programming mode (the
factory default is 1-2-3-4). Once accessed (
~
), press
Ż
or
Ź
to select the number to
be changed. Press
~
repeatedly
to change the number value. Press
Ż
or
Ź
to select
the next number to change. When done, press
Ź
VOUJMFYnBTIFTPOUIFEJTQMBZBOE
press
~
. Press
Ź
to display the subsequent menu features.
Banner Name -
changes the banner name that appears on the display. No banner
name appears when all blanks are entered. Once accessed (
~
), press
Ż
or
Ź
to
select the letter to change. Press
~
repeatedly
to change the letter. When done, press
Ź
VOUJMFYnBTIFTPOUIFEJTQMBZBOEQSFTT
~
. Press
Ź
to display the subsequent
menu features.
P-Maintenance -
adjusts the P-Maintenance (preventive maintenance) brew monitor.
When on, the UCM measures the number of gallons brewed before the P-Maintenance
reminder appears on the display. The range is Off to 3000 gallons (11,000 liters).
Once accessed (
~
), press
Ż
or
Ź
to select the desired setting, then press
~
to save.
Press
Ź
to display the subsequent menu features.
continued...
