PROGRAMMING GUIDE
PG4
Pulse Brew Guidelines
• Filter pack type coffees typically extract better with the A and B pulse setting.
• Decaffeinated coffees typically extract better with the B pulse setting.
• High-yield coffees typically extract better with the C pulse setting. Of course,
BOZPGUIF"#PS$TFUUJOHTNBZCFVTFEUPTVJUZPVSUBTUFQSPmMF
• Settings D and E are manual pulse counts.
8$130(3"..*/((6*%&ø
B
continued
continued...
Safety Sw On/Off
<-- Select -->
Energy Save Mode
<-- Select -->
Brew Count Odom
<-- Select -->
Brew Count Total
<-- Select -->
Temperature
<-- Select -->
Coffee Drip-Out
<-- Select -->
Coffee Drip-Out (combo units only) -
sets the Coffee Drip-Out time. Drip-out allows
additional time for coffee to drain from the brew basket before “Brewing” disappears
from the display. Once accessed (
~
), press the BREW button for which the Drip-Out
time needs to be changed (SHIFT+BREW selects half batch on some models). Press
Ż
or
Ź
to increase or decrease time. The range is Off to 5:00. Press
~
to save. Press
Ź
to display the subsequent menu features.
Safety Sw On/Off (combo units only) -
turns the feature On and Off. Once accessed
(
~
), press
Ż
or
Ź
to toggle between On and Off. Press
~
to save. Press
Ź
to display
the subsequent menu features.
Temperature -
adjusts the maximum tank water temperature. Once accessed (
~
),
press
Ż
or
Ź
to increase or decrease the temperature. The setting range is 170ºF
to 208ºF (77ºC to 98ºC). Press
~
to save. Press
Ź
to display the subsequent menu
features.
Energy Save Mode -
saves energy during periods when the brewer is not in use.
When set to On, the brewer automatically shuts off four hours after the last brew
cycle. Press the ON/OFF button to return to normal operation. When set to On-140ºF
(60ºC), the brewer shuts off four hours after the last brew cycle, but the water tank
temperature remains at 140ºF. Use the On-140ºF setting to reach brewing temperature
faster after periods of non-use. Once accessed (
~
), press
Ż
or
Ź
to choose the
desired setting. Press
~
to save. Press
Ź
to display the subsequent menu features.
Brew Count Odom -
When accessed, this feature displays the total brew cycles
since the odometer was last reset. Press
Ź
to go back without resetting or
~
to
reset.
Press
Ź
to display the subsequent menu features.
Brew Count Total -
when accessed (
~
), displays the total brew cycles on the brewer.
It cannot be reset. The display returns to the previous screen automatically after a few
seconds. Press
Ź
to display the subsequent menu features.
3
3
3 Models COMBO, COMBO/IC and COMBO-SWEET only.
continued...
